Non-shrinking formulations designed to withstand intense mechanical stress, vibration, and chemical attack when replacement parts face lengthy lead times.
Rebuilding Metal Surfaces
Sealing Critical Leaks
Gap Filling & Casting Repair
Restores scored hydraulic rams, worn shaft journals, stripped keyways, and cracked engine blocks with steel and aluminum filled putties that machine like host metal.
Fast-setting emergency formulations cure under damp conditions to isolate pinhole pipe ruptures, corroded elbow joints, and leaking storage tanks without hot work.
High-density epoxy paste bridges wide structural tolerances, fills porosity defects in new castings, and provides long-term galvanic isolation between dissimilar metals.
Selecting Your Formulation
Substrate Compatibility
Thermal & Chemical Exposure
Working Time & Machinability
Match steel, stainless, aluminum, bronze, or wet-surface base polymers to ensure thermal expansion parity and prevent galvanic contact corrosion.
Verify operating environments against continuous temperature limits, intermittent thermal spikes, and direct immersion in cutting oils, fuels, or caustic washes.
Balance 5-minute emergency stick repairs against machinable 30-minute working putties that can be drilled, tapped, turned, and ground to precise tolerance.
Performance Under Load
120°C
continuous thermal resistance
85 MPa
cured compressive strength
100%
machinable metal-fill bond
0%
dimensional shrinkage rate
Describe your component material, operating pressure, chemical environment, and turnaround requirements. Our technical specialists will verify the exact Loctite compound for your repair.